Our Courses

Course Fee, Duration & Qualification

Course Fee = 25,000/-

Course Duration = 4 Months

Qualification = 12th Passed

Course Content

• Introduction to Industrial Safety
• Occupational Health and Hygiene
• Safety Legislation and Compliance
• Risk Assessment and Management
• Fire Safety and Emergency Planning
• Electrical & Mechanical Safety
• Hazardous Materials and Chemical Safety
• Accident Investigation and Analysis
• Environmental Protection
• Safety Engineering and Management Systems
• Leadership and Behavioral Safety
• Specialized Topics

Course Fee, Duration & Qualification

Course Fee = 25,000/-

Course Duration = 3 Months

Qualification = Matric

Theoretical Module

• Crane Anatomy & Types
• Stability & Ground Conditions
• Load Charts
• Safety Regulations
• Rigging & Communications

Practical Module

• Control Functions
• Crane Setup
• Lift Operation
• Operator Aids

Key Safety Aspects

• Hazard Identification
• Personal Protective Equipment
• Emergency Procedures

Course Fee, Duration & Qualification

Course Fee = 45,000/-

Course Duration = 5 Months

Qualification = No Bar

Course Content

• Welding Tools and Machines
• Safety Precaution during Welding
• Types of Welding
• Electrodes and Filler Wire
• Base Metal, Pipes and Plates
• Welding Positions
• Welding Symbols
• Welding Defects and Repairs, Inspection
• SMAW / MHAW Process
• TIG (GTAW) Process
• High Pressure Pipe Welding
• Defects in Welding Joint

Course Fee, Duration & Qualification

Course Fee = 23,000/-

Course Duration = 3 Months

Qualification = Non Matric

Excavator Module

• Introduction to Excavators
• Safety Regulations and Standards
• Machine Orientation and Pre-operation Procedures
• Operational Techniques
• Maintenance and Troubleshooting
• Worksite Communication and Coordination
• Emergency Procedures
• Post Operation Procedures

Course Fee, Duration & Qualification

Course Fee = 23,000/-

Course Duration = 3 Months

Qualification = Non Matric

JCB Module

• Introduction to Excavators
• Safety Regulations and Standards
• Machine Orientation and Pre-operation Procedures
• Operational Techniques
• Maintenance and Troubleshooting
• Worksite Communication and Coordination
• Emergency Procedures
• Post Operation Procedures

Course Fee, Duration & Qualification

Course Fee = 25,000/-

Course Duration = 4 Months

Qualification = Matric

Course Module

• Cassette AC Unit
• Ductable AC Unit
• VRV System
• VRF System
• Chilled Water System
• Chillers
• Valves
• Expansion Tank
• Cooling Tower
• Air Cooled and Water Cooled Compressor
• Compressor
• Condenser
• Chilled Water Piping Layout
• Chilled Water Insulation Layout
• Chilled Water Valves

Course Fee, Duration & Qualification

Course Fee = 25,000/-

Course Duration = 6 Months

Qualification = Matric

Course Module

• Air Conditioning
• Mechanical
• Electrical
• Plumbing
• SCADA
• Fire Fighting
• Facilities and Service
• Electronic (CCTV)

Course Fee, Duration & Qualification

Course Fee = 20,000/-

Course Duration = 3 Months

Qualification = Matric

Course Content

• Introduction to Water Treatment
• Water Quality and Analysis
• Design and Equipment
• Operation and Maintenance
• RO Plant (Reverse Osmosis)
• STP (Sewage Treatment Plant)
• Haemodialysis
• Water Softener
• Filter Plant
• M.S.F.S.
• WWTP

Course Fee, Duration & Qualification

Course Fee = 25,000/-

Course Duration = 4 Months

Qualification = Matric

Course Module

• Basic Electrical
• Basic Principle of Petroleum
• Overview of Oil & Gas Processing
• Pressure Measurement
• Temperature Measurement
• Level Measurement
• Flow Measurement
• Introduction to Automatic Control
• Instrument Calibrations
• PLC Programming
• SCADA

Practicals

• Safety in Workplace
• Installation, Repair and Maintenance of Pressure Measurement
• HART Operation and Connection Procedure
• Structure of PLC & PLC Program
• Control Valves
• Control of Monitor and Display Units (PLC, SCADA, DCS)
• Installation in DTP

Additional Common Courses

• DC Electrical Systems – Direct current theory, series/parallel circuits, inductors, capacitors, semiconductors, batteries, and testing equipment.
• AC Electrical Systems – Alternating current theory, transformers, single/poly phase motors, AC circuits, RLC, impedance, and power factor.
• Process Measurement Instrumentation – Pressure, flow, temperature, level, calibration, force, position, and weight measurements.
• Hydraulics and Pneumatics – Fluid and air power principles, pressurization, control, and application.

Course Fee, Duration & Qualification

Course Fee = 18,000/-

Course Duration = 3 Months

Qualification = 10+2

Course Module

• Fundamental
• Geomatrical Construction
• Unit Conversion & Measurement
• Work Shop Calculation
• Isometric Drawings
• Sectional Drawings
• 2D & 3D
• Assembly
• Blue Print Reading
• Metrology Engineering Measurement

Course Fee, Duration & Qualification

Course Fee = 22,000/-

Course Duration = 4 Months

Qualification = Matric

Course Content

• Introduction to QC
• Terms and Definitions
• Welding Positions
• Defectology
• Welding Defects and Imperfections
• Heat Treatments
• Calibration and Safety
• Fabrication QC
• Welding Inspector
• Risk Based Inspection
• Productivity
• Load Testing
• Stress Testing
• Traceability in QC
• Associating a Defect with the Test Case in QC
• Major Steps for Problem Solving
• Matrix of Problem Solving Steps vs Tools
• Tips for Presentation
• General Guidelines for QC Record Maintenance
• Evaluation of Quality Circle
• Tata Steel Evaluation Steel System
• CII Evaluation System
• Forms in Use

Course Fee, Duration & Qualification

Course Fee = 40,000/-

Course Duration = 4 Months

Qualification = Not Specified

Course Content

• Quality Control, Concepts and Culture of Organisation
• ISO System of Quality
• Strategic Quality Management
• Construction Drawing
• Material and Welding Engineering
• Fabrication, Erection and Painting
• Quality Tools and Testing Processes
• NDT (RT, UT, MPT, and DPT)
• Inspection and Quality Control
• Process Management
• Statistical Quality Control I & II
• ISO 9001 (Implementation & Orientation)
• Quality Planning and Information Systems for the Customer’s Perspective
• Supply Chain Management

Course Fee, Duration & Qualification

Course Fee = 20,000/-

Course Duration = 4 Months

Qualification = Matric

Course Content

• Magnetism
• Electronics
• Electricity
• Heat
• Electromagnetic Radiation
• Sound
• Dynamics
• Light
• Gravitation
• The Earth
• Maps
• The Lithosphere
• Physical Features of India

Mathematics & Survey Skills

• Axioms and Postulates
• Polygons
• Theorems
• Congruence of Triangles
• Triangles
• Quadrilaterals
• Concurrent Lines of Triangle
• Theorems on Quadrilaterals
• Types of Quadrilaterals
• Total Station
• Mid Point Theorem
• Surface Areas and Volumes of Solids
• Cyclic Quadrilaterals

Course Fee, Duration & Qualification

Course Fee = 22,000/-

Course Duration = 3 Months

Qualification = Matric

Course Overview

In modern civilization, pipes are used to supply water, oil, steam, and gases from one place to another. Pipes are hollow cylindrical pieces with low wall thickness and are made from materials such as mild steel, stainless steel, cast iron, PVC, copper, aluminum, and lead. A pipe fitter installs complete pipelines with joint equipment such as elbows, tees, crosses, and valves. They must have knowledge of different pipe joints, pipe layout drawings, valve servicing, threading, and pipe fitting techniques.

Theory

• Fundamentals of Pipe Fitting
• Basic Mechanics
• Types of Pumps
• Piping System
• Machine Shop Practice
• Maintenance of Pipe Fitting
• Performing Pipe Fitting

Course Fee, Duration & Qualification

Course Fee = 30,000/-

Course Duration = 2 Months

Qualification = No Bar

Course Content

Theory:

• Operating system & Manual
• Different type of Crane
• Safe Driving & Operating
• Safety Precaution
• Parts Manual
• Liever Function
• Hand Signal
• Load Chart
• Maintenance
• Crane Mechanical Knowledge
• Trouble Shooting
• Interview Face

Practicals:

• Crawler Operating (Continue)
• Tower Crane Maintenance
• Dumper Driving (6 Wheel)
• Dumper Maintenance
• Dumper Driving Testing
• Crane Operator Testing
• Different types job loading & unloading in different angles
• Trouble Shoot Practical Knowledge
• Rigger Testing

Course Fee, Duration & Qualification

Course Fee = 28,000/-

Course Duration = 3 Months

Qualification = No Bar

Course Module

Theory

• Operating system & Manual
• Different type GRADER
• Safe Driving & Operating
• Safety Precaution
• Parts Manual
• Liever Function
• Lubricants
• Maintenance
• GRADER Mechanical Knowledge
• Trouble Shooting
• Interview Face

Practicals

• GRADER Operating (Continue)
• GRADER Maintenance
• GRADER Dumper Loading
• Dumper Driving (6 Wheel)
• Dumper Maintenance
• Dumper Driving Testing
• JCB Operator Testing
• Side Levelling & Dozing
• Trouble Shoot Practical Knowledge

Course Fee, Duration & Qualification

Course Fee = 25,000/-

Course Duration = 3 Months

Qualification = No Bar

Theory

• Operating System & Manual
• Different Types of Loader
• Safe Driving & Operating
• Safety Precautions
• Parts Manual
• Liever Function
• Lubricants
• Maintenance
• Loader Mechanical Knowledge
• Troubleshooting
• Interview Preparation

Practicals

• Loader Operating (Continuous)
• Loader Maintenance
• Loader Dumper Loading
• Dumper Driving (6 Wheel)
• Dumper Maintenance
• Dumper Driving Testing
• Loader Operator Testing
• Loader Cutting, Digging, Ripping, Backfilling, Leveling & Marching
• Loader Side Levelling & Dozing
• Troubleshoot Practical Knowledge

Course Fee, Duration & Qualification

Course Fee = 25,000/-

Course Duration = 4 Months

Qualification = Matric

Course Module

Theory

• Safety in work place
• Introduction Of Window AC, Split AC & HVAC
• Basic Electrical
• Basic Refrigerator & Air Conditioning
• Importance Of HVAC
• Use of refrigeration
• Direct Expansion AC system
• Chiller plant AC System
• Electrical use of clamp meter
• Volt, ampere & ohms
• Room A/C & Split Unit
• Wiring diagram
• Control circuit & wiring diagram
• Motor testing (440V Motor)

Practicals

• Copper tube cutting
• Flaring, swaging
• Brazing by butane gas torch
• AC (room) wiring for 440V motor
• Control circuit wiring
• Measurement by vernier caliper
• LPG & Oxygen Gas Welding
• How To HVAC Controls
• Main Components Of HVAC
• Domestic and Commercial AC System Troubleshooting
• Operation Of Cooling Tower

Course Fee, Duration & Qualification

Course Fee = 20,000/-

Course Duration = 3 Months

Qualification = Matric Pass

Course Module

• GI Piping
• PVC Piping
• P.P.R Piping
• C.S, S.S & Copper
• Pipe Fittings
• LPG Line work
• Bathroom Fitting

Course Fee, Duration & Qualification

Course Fee = 20,000/-

Course Duration = 1 Month

Qualification = Matric

Course Module

Theoretical

• Forklift Fundamentals
• Safety Procedures
• Load Management
• Vehicle Inspection and Maintenance

Practical

• Equipment Introduction
• Steering and Maneuvering
• Load Handling Practice
• Workplace Application
• Emergency Response
• Practical Evaluation

Course Fee, Duration & Qualification

Course Fee = 23,000/-

Course Duration = 3 Months

Qualification = Matric

Course Content

• Inventory Management: Receive, inspect, and record incoming goods; store items in an organized manner; issue materials and supplies as requested.
• Record Keeping: Maintain accurate records of inventory levels; conduct regular stock counts and reconcile discrepancies.
• Storage Organization: Keep the storage area clean, safe, and well-organized; label and categorize items.
• Ordering Supplies: Monitor stock levels, place orders, and coordinate with suppliers for timely delivery.
• Quality Control: Inspect goods for damage or defects; report issues to supervisors or suppliers.
• Safety Compliance: Follow safety protocols and ensure compliance with health and safety regulations.

Skills and Qualifications

• Organizational Skills
• Attention to Detail
• Basic Math Skills
• Communication Skills
• Familiarity with inventory management software (e.g., SAP, Oracle) is a plus

Work Environment

Storekeepers typically work in warehouses, retail stores, or manufacturing facilities. The role may involve standing for long periods, lifting heavy items, and operating equipment like forklifts.